SWING CUT CARVING TUNER W/MILL CUT FILES – 3002

The angle of the bevel is adjusted with the Black dial in increments form 0° to 5°.  Angles available are 0°, 0.5°, 2°, 3°, 4°, 4.5°, 5°.   Mill cut file can be used in side edge position or base edge position.  Edges can be deburred with included Alu-oxide stone.

Replacement and option files are:

3056 20x30mm Mill cut file (included)
3057 20x30mm Fine Chrome file
3058 20x30mm Alu Oxide stone (included)
3059 20x30mm Ceramic Stone
3060 20x30mm Tunsten Carbide file
3052 20x30mm Black 220 grit diamond stone
3052.1 20x30mm Blue 325 grit Diamond stone
3052.2 20x30mm Red 600 grit Diamond stone
3062 Tungsten carbide square cutter (needs 3063)
3063 20x30mm Retaining plate for 3062